中国典型城市环境空气质量变化趋势分析研究

文章选取北京市、兰州市、乌鲁木齐市、青岛市、武汉市、深圳市这六个典型城市为研究对象,利用2003年-2013年六个城市的SO2、NO2和PM10浓度数据,计算出区域空气综合污染指数和污染负荷指数,并采用Daniel趋势检验法分析主要污染物的变化趋势.结果表明,六个典型城市环境空气质量状况从优至差排列依次为深圳、青岛、武汉、北京、兰州、乌鲁木齐;六个典型城市空气首要污染物为PM10,SO2的污染负荷呈下降趋势,NO2的污染负荷呈上升趋势;各城市的空气质量整体呈现好转趋势,表明大气治理初见成效.     

顶空毛细柱气相色谱法测定水中七种苯系物研究

选用Elite-FFAP色谱柱,利用顶空-毛细柱气相色谱技术对水中的苯、甲苯、乙苯、对二甲苯、间二甲苯、邻二甲苯、苯乙烯七种挥发性苯系物进行同时测定,并对样品的平衡温度、保温时间、程序升温的条件控制、水中含盐量等影响因素进行了探讨,优化了检测条件,使七种挥发性苯系物得到不错的分离。样品平衡温度控制在70℃,样品平衡时间19 min,进样口温度180℃,检测器温度230℃,10 mL水样中加入4 g NaCl的条件下,分离效果最佳。     

宝鸡市经济增长与环境空气综合污染指数关系研究

文章以空气综合污染指数法分析了宝鸡市2006年-2011年的环境空气质量状况,分析结果表明宝鸡市环境空气质量逐年变好。以人均GDP为经济指标,以空气综合污染指数为环境指标,建立经济增长与环境空气质量之间的计量模型,进行环境库兹涅茨曲线实证研究。研究结果表明,宝鸡市经济增长和环境空气质量的关系符合库兹涅茨曲线"拐点"后的下降部分。证明该市2006年-2011年的环境空气质量与人均GDP处于良性发展状态。     

某大型钢结构项目喷涂废气污染防治措施可行性分析研究

钢结构建筑是一种新型的节能环保的建筑体系,大多数大型钢结构产品在生产过程中均需要进行抛丸除锈、喷涂处理,使用油漆进行喷涂过程中将不可避免地产生含TVOC(主要为甲苯、二甲苯和非甲烷总烃)的有机废气。大型钢构类生产项目喷涂废气的收集和处理尤为困难。文章结合某大型钢结构生产企业实际采取的喷涂废气治理方法进行喷涂废气污染防治可行性分析,旨在为同类项目喷涂废气污染治理及进一步改良涂装废气治理工艺和技术提供参考依据。     

西安市PM_(2.5)污染源位置确定的模型应用研究

针对空气中PM2.5污染物的传播问题,以西安市的情况为实例,合理考虑风力等天气和季节因素的影响,建立能够刻画该地区PM2.5的发生和演变规律的有风高斯点源扩散数学模型,代入相关数据后,利用MATLAB软件求解出PM2.5污染源由一区扩散到另一区的浓度,最后由综合的各区总浓度得出PM2.5污染源的位置,并与该市实际检测到PM2.5数据进行对比分析。结果表明,确定的位置比较准确,该方法能为城市污染治理提供参考。     

环境中铅、汞离子污染对自闭症儿童的影响研究

自闭症是一种小儿广泛性的发育障碍。目前关于自闭症的研究多是从社会、心理及生物学角度进行讨论,而对环境污染对自闭症患儿产生的影响没有过多关注。针对该问题,综述了铅、汞离子在环境中的污染状况以及空气、水与食物中铅、汞离子污染的水平,探讨人体铅、汞离子暴露途径及其对儿童自闭症的影响。提出应加强对环境中铅、汞离子污染的研究,开展人体铅、汞离子暴露的潜在风险评估,为保证居民尤其是婴幼儿的健康提供科学依据。     

Ionic composition of submicron particles (PM1.0) during the long-lasting haze period in January 2013 in Wuhan, central China

In January 2013, a long-lasting severe haze episode occurred in Northern and Central China; at its maximum, it covered a land area of approximately 1.4 million km². In Wuhan, the largest city in Central China, this event was the most severe haze episode in the 21st century. Aerosol samples of submicron particles (PM_1.0) were collected during the long-lasting haze episode at an urban site and a suburban site in Wuhan to investigate the ion characteristics of PM_1.0 in this area. The mass concentrations of PM_1.0 and its water-soluble inorganic ions (WSIIs) were almost at the same levels at two sites, which indicates that PM_1.0 pollution occurs on a regional scale in Wuhan. WSIIs (Na⁺, NH₄⁺, K⁺, Mg²⁺, Ca²⁺, Cl^-, NO₃^- and SO₄^2-) were the dominant chemical species and constituted up to 48.4% and 47.4% of PM_1.0 at WD and TH, respectively. The concentrations of PM_1.0 and WSIIs on haze days were approximately two times higher than on normal days. The ion balance calculations indicate that the particles were more acidic on haze days than on normal days. The results of the back trajectory analysis imply that the high concentrations of PM_1.0 and its water-soluble inorganic ions may be caused by stagnant weather conditions in Wuhan.     

Compositions and sources of organic acids in fine particles (PM2.5) over the Pearl River Delta region, south China

Organic acids as important constituents of organic aerosols not only influence the aerosols' hygroscopic property, but also enhance the formation of new particles and secondary organic aerosols. This study reported organic acids including C14–C32fatty acids, C4–C9dicarboxylic acids and aromatic acids in PM2.5collected during winter 2009 at six typical urban, suburban and rural sites in the Pearl River Delta region. Averaged concentrations of C14–C32fatty acids, aromatic acids and C4– C9 dicarboxylic acids were 157, 72.5 and 50.7 ng/m3, respectively. They totally accounted for 1.7% of measured organic carbon. C20–C32fatty acids mainly deriving from higher plant wax showed the highest concentration at the upwind rural site with more vegetation around, while C14–C18fatty acids were more abundant at urban and suburban sites, and dicarboxylic acids and aromatic acids except 1,4-phthalic acid peaked at the downwind rural site. Succinic and azelaic acid were the most abundant among C4–C9dicarboxylic acids, and 1,2-phthalic and 1,4-phthalic acid were dominant aromatic acids. Dicarboxylic acids and aromatic acids exhibited significant mutual correlations except for 1,4-phthalic acid, which was probably primarily emitted from combustion of solid wastes containing polyethylene terephthalate plastics. Spatial patterns and correlations with typical source tracers suggested that C14–C32fatty acids were mainly primary while dicarboxylic and aromatic acids were largely secondary. Principal component analysis resolved six sources including biomass burning, natural higher plant wax, two mixed anthropogenic and two secondary sources; further multiple linear regression revealed their contributions to individual organic acids. It turned out that more than 70% of C14–C18fatty acids were attributed to anthropogenic sources, about 50%–85% of the C20–C32fatty acids were attributed to natural sources, 80%–95% of dicarboxylic acids and 1,2-phthalic acid were secondary in contrast with that 81% of 1,4-phthalic acid was primary.     

水稻种植对中亚热带红壤丘陵区小流域氮磷养分输出的影响

以湖南省长沙县的脱甲流域(高水稻种植面积比例)和涧山流域(低水稻种植面积比例)为研究对象,对比研究红壤丘陵地区典型农业流域水稻种植对河流水体氮磷浓度和输出强度的影响.连续16个月的监测结果表明,脱甲和涧山流域河流水体均存在比较严重的养分污染,尤其是氮污染;对比两个流域,脱甲流域河流水体的氮磷浓度水平和水质恶化程度均高于涧山流域.从养分组成来看,脱甲流域河流水体中氮以铵态氮为主(占总氮的58.5%),而涧山流域主要是硝态氮(占总氮的76.1%).脱甲流域中可溶性磷占总磷比例为47.1%,高于涧山流域的37.5%.从养分浓度变化的时间动态而言,两个流域河流中各形态氮素水平在1~2月和7月较高,而可溶性磷和总磷在5~6月和10~12月出现两个峰值.由于两个流域河道径流主要集中在水稻种植期间的4~10月,脱甲流域河流中较高的氮磷养分浓度意味着潜在的氮磷流失风险.脱甲流域月平均总氮输出通量为1.67 kg·(hm2·月)-1,总磷为0.06 kg·(hm2·月)-1,均高于涧山流域的0.44 kg·(hm2·月)-1和0.02kg·(hm2·月)-1.考虑到两个流域的气候、地形地貌、土壤类型、农田耕作方式相似而只是水稻种植面积比例不同,因此,在该地区传统的水稻栽培管理模式下,较高面积比例的水稻种植对流域河流水体环境存在潜在威胁.     

Characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China

To understand the pollution characteristics of atmospheric particles and heavy metals in winter in Chang-Zhu-Tan city clusters, China, total suspended particulate(TSP) and PM10samples were collected in cities of Changsha, Zhuzhou and Xiangtan from December 2011 to January 2012, and heavy metals of Cd, Pb, Cr, and As were analyzed. It shows that the average TSP concentration in Changsha, Zhuzhou and Xiangtan were(183 ± 73),(201 ± 84) and(190 ± 66) μg/m3respectively, and the average PM10 were(171 ± 82),(178 ± 65) and(179 ± 55) μg/m3respectively. The lowest TSP and PM10concentrations occurred at the background Shaping site of Changsha. The average ratio of ρ(PM10)/ρ(TSP) was 91.9%, ranging from 81.3% to 98.9%. Concerning heavy metals, in TSP samples, the concentration of Cr, As, Cd and Pb were 28.8–56.5, 18.1–76.3, 3.9–26.1 and 148.0–460.9 ng/m3, respectively, while in PM10samples, were 16.4–42.1, 15.5–67.9, 3.3–22.2 and 127.9–389.3 ng/m3, respectively. The enrichment factor of Cd was the highest, followed by Pb and As, while that of Cr was the lowest.